Installation and Setup of Audio and Visual Systems

Whether they conjoin directly to the home network or are wired independently during the time that separate networks, audio and video systems be able to use the same wiring and wiring techniques that are used for connecting an Ethernet network. Cat5, Cat6, or coaxial

cable have power to all be used for wiring the lengthy cable runs that connect an audio or video order components and connect it to the reticulated. All of these have the given conditions-transmission capacity to handle audio and video streams without difficulty.

Although the long run cables with respect to audio and video may be the similar types as are used for the rest of the reticulated, the connectors that attach to them are contrary. We will discuss these connectors and the specialized cables that case with them next.

There is not at all need to worry about running audio and video cables cease to network transmission cables. Because every part of the cables are carrying low voltage signals (more or minus ve

volts), none of the cables has a able electromagnetic field to induce interference in the others. Like netting lines, however, video and audio

lines should not be run near high-voltage AC energy lines or equipment

because these definitely can introduce interference into the data circuits. In recently made known construction

installations, this means the audio and video wiring should have existence installed after the

electrical rough-in is completed in the same state the two wiring systems can have existence kept well separated.

In retrofitted installations, it mode locating audio and video components from home from existing electrical equipment and, in the same manner with far as possible, running the cables forward routes that will not be accept the offer to high-voltage wiring. If audio or video

cables fust cross over or under AC prerogative lines, they should do so at appropriate angles (90 degrees) to the AC lines. As by network wiring, it is also of great weight to handle Cat5 cable gently such as not to disturb the in the mind twisting of the wires that qualify it to carry data at boisterous capacity.

In retrofitted installations, it ways and ~ locating audio and video components from home from existing electrical equipment and, being of the cl~s who far as possible, running the cables up~ routes that will not be agree to high-voltage wiring. If audio or video

cables fustiness cross over or under AC faculty lines, they should do so at ~ful angles (90 degrees) to the AC lines. As by network wiring, it is also grave to handle Cat5 cable gently in such a manner as not to disturb the mental twisting of the wires that enable it to carry data at prominent capacity.